For "antitarlo treatment", we mean all those cases involving the use of specific acts to the elimination of tarlo from our mobile (or wooden structures).

 
MEANS TO FIGHT

Treatment with insecticides
The insecticidal solutions can stain and ruin the area treated, it is always advisable to run the small tests, especially on lacquered wood, painted, etc..

Treatment with gas
The treatments with gases have two huge advantages over normal applications of insecticides: greater efficiency and no damage on manufactured goods. The gas reaches the insect inside the manufactured wherever it is, regardless of the size and type of wood.
The mortality of each stage of insect life, at any depth of the surface, it is total. The gases used in the fight against tarli not bathe, not ungono and not react with components of wood and therefore, at the end of treatment, there is no trace of gas and the building maintains its characteristics.

 

Putting into practice what has been said is not easy: eliminate the non tarlo always successful, and often need longer times to treatment without a guarantee of total success. This is explained as the tarlo, sometimes nest in the depths of tunnels, not always reachable by poisonous gas or liquid with which we try to poison. Also, if the treatment execute when our hated enemies is in the stage of "egg", treatment is usually ineffective. We try to tackle the problem by considering various stages where it can provide: Maintenance: Suppose that we realize the presence of tarlo in our mobile home, through the sudden appearance of small piles of wood dust that we already spoken. For this type of intervention, we must obtain a good product antitarlo stic and a wax color more like the furniture on which we must take action: both products can easily find them in any hardware. The type of action is simple and affordable for all (clearly taking the necessary precautions when using poisonous products) is sufficient to inject the liquid antitarlo in each hole then closing with a spaghetti obtained by stic wax. When you inject the liquid, be careful that this policy does not overflow from the mobile machine, especially if finished in shellac. While injecting the liquid then, with the other hand, hold a straccetto or a cotton ball around the needle ready to stop any leakage of liquid. This type of intervention has the advantage of being extremely simple and immediate, and is perhaps the only affordable for everyone. It causes a poisoning of wood fibers in the tunnel exit dell'insetto adult, in which the female has allegedly spawning. The holes that we have to "syringe" are also old, with dark profile, as possible receptacles of eggs. Phase Restoration: In phase of restoration, furniture can also find much worse conditions than previously described. Before deciding the type of intervention, we must realize that the tarlo has damaged the wood. In some cases, you are forced to replace if not fully at least to consolidate some parts severely damaged. Once completed the intervention of consolidation / repair the damage, we move on to stage real treatment. In this case, always with the necessary precautions, and provided that the size of the cabinet permit, we can intervene with the method of "gas chamber" This time we must have a sufficient amount of antitarlo (one or two liters) than with a brush off properly, spennelleremo abundantly on all parties not painted furniture. Back, and internal funds of drawers and furniture should be treated. We have previously prepared a cloth bag or nylon wrap completely mobile. in which we leave a container with antitarlo. The Nylon surrounding the mobile stop him with gummed tape. Leave the mobile in these conditions for at least three weeks. E 'advisable to do so or in late spring or in autumn when the eggs hatch. He spent three weeks, remove the nylon leaving the mobile dry for two or three days in a place areato. Now turn to syringes each hole as we have seen before. As regards the closure, we could use wax or plaster with plaster of Bologna where the holes are many and is scheduled to finish shellac. This type of intervention, only possible in an appropriate environment, not to be absolutely at home for obvious reasons, is more effective than the previous year as it involves the poisoning of much of the wooden structure through the abundant spennellatura of antitarlo, the almost complete saturation of tunnels with gas venefici (through the gas chamber) and invasion of galleries poisonous liquid by injection. Professional Methods: Despite the apparent effectiveness of the method described would seem that does not provide an absolute guarantee of success, as always and in some remote tunnels are not affected by agents venefici. So at this point we pass to the professional activities of those who fight to tarli has done its job. Some companies offer services using pest control, among others, the method of vacuum. In places where the furniture you create a vacuum aspiration air and then inject the gas venefici. The gases, for the effect of the vacuum created reach any slot or even more distant gallery not finding the air as an obstacle by making more efficient operation. This treatment is guaranteed up to five years. Some companies offer this service at home.

Antitarlo products and consolidating PHASE: Line PERMET specific antitarlo offers the following products: * Concentrate: Concentrate for professional use, odorless, non-flammable, to be diluted 1:50 in the solvent most likely to fight over time insect wood (conf . 100 ml, 1LEN.) * In Oil: Solution ready for use, completely colorless and virtually odorless, to be applied by brush or spray on manufactured goods in working or in work. (Confirm 250 ml, 1.5 lit, 20 lit.) * Injection: Aerosol insecticide against specific insects wood, fitted with special jet for the location of the product in the holes of tarli. (Confirm 400 ml) * Spray lucidamobili: Aerosol product containing the insecticide over a piece of fine natural waxes that nourish and maintain the wood. (Confirm 400 ml) * Wax: Wax from fine antiques containing the active insecticide, for polishing and maintenance of the artefacts. (Confirm 400 ml) These products meet the following conditions of quality: The product antitarlo should be extended on the wooden surface to ensure penetration in depth and therefore effective. Needs to develop a highly toxic to insects xilofagi, but not toxic to any other body. It should not be easily run off to their base compounds birds and his action must be possible to develop more depth in the wood without producing corrosion on metal parts contiguous will present an adverse effect on glue or paint finish. Must have a neutral color transparency. It may be simply applied by brush, spray or injection with syringe. It must be resistant to ultraviolet radiation and must not become clogged the natural porosity of the wood or make films to esfoliare.Deve allow you to do the normal operations of finishing the building which must be submitted. It must exercise that curative action is preventive. Its effectiveness needs to be fostered by policies that eliminate possible sources of moisture and ensure good ventilation environment. . XIREIN Product Antitarlo Protector N - protective coatings - The catalog of a famous Milanese distributor of materials and equipment for restoration (Bresciani), lists the card antitarlo this: With Protector N we have not only solved the problem of having an effective protective Using as the active ingredient Permethrin but not harmful to humans (no endosolfuro, lindane or DDT). The solvent of this product, can convey the active ingredient in an optimal way to have an effective penetration into the wood (in 24 hours, for capillarity can penetrate into the wood for more than 50 cm) and is not toxic to humans. E 'odorless and colorless coatings does not alter the fabric or paper. Protector N * stabilizes the wood by reducing the absorption of moisture and dry climate in retreat. * Safeguard the wood from bacteria, fungi and algae. * Is effective against insects xilofagi which tarlo (Anobium Puctatum), Capricorn houses (Hylotrupes bajulus), lictus (Lyctus brunneus), wood wasp (Sirex gigas), so termites. * * Prevents infections from the treated wood is not attacked repaint * most * not paint background degrades the light * non-corrosive metal * E 'compliance with the standard American rule that the wood preservatives and exceeds the European standard for the same matter. Consolidation of Wood: The consolidation of wood is needed when a wooden handicrafts are in a situation of deterioration avanzato.In very kind this deterioration affects mainly the internal structure of wood and works insects xilofagi.Questi insects weaken to the point the structure of wood to make it almost spongy and weak to withstand the meccaniche.Il consolidation usually is made with acrylic resins including one of the most effective is the "PARALOID B72." This substance is used in major centers of restoration works on high artistic value. It 'been used for the first time in the restoration of the wooden crucifix of Duccio at the Opificio delle Pietre Dure in Florence, after all'alluvione'66. The drug trade is in the form of granules (B72) is a resin that must be dissolved in solvents such as alcohol, the nitro thinners, acetone, eccetera.La solution penetrates in the building, in tunnels dug by tarli, dries it expands and hardens tutto.Il reinforcing the consolidation can be made for draft for spennellatura or siringatura. It operates on a different meaning that it begins with the PARALOID more diluted (10%) and gradually increases the concentration (up to 20%). The amount of PARALOID may not be excessive as this, could hardening split wood. Products for the Consolidation: PARALOID: The catalog of a famous Milanese distributor of materials and equipment for restoration (Bresciani), under Chapter RESINS AND ACRYLIC EMULSIONS lists different types of PARALOID produced by ROHM HAAS. PARALOID B44-methyl methacrylate excellent hardness, good flexibility and large membership on many different media, especially metal. Soluble in aromatic hydrocarbons, ketones and esters. Only partially soluble in alcohol and aliphatic hydrocarbons PARALOID B66-butyl-methyl methacrylate Excellent membership, flexibility and toughness, quick drying air the film. Soluble in toluene, xylene. PARALOID B67-methyl isobutyl form a slightly tougher film of B72. Used in mixtures with other resins to increase the surface hardness. Co, compatible with alkyd resins, medium and long oil. Soluble in white spirit, toluene, xylene and so on. PARALOID B72-ethyl methacrylate resin for general use, excellent flexibility and transparency. Soluble ketones, esters, aromatic hydrocarbons and chlorinated. Blended with ethanol with which it forms a milky solution, the film that is formed and are entirely transparent PARALOID B82-methyl methacrylate properties similar to the B72 with the property to be soluble in certain mixtures of water and alcohol.

 

TREATMENT ANTITARLO
Undergoing restoration, can also find mobile infested by tarli that drovanno necessarily be subject to appropriate treatment based antitarlo liquid.

We must have a sufficient quantity of product antitarlo (usually takes about 3 liters to treat a classical chest of drawers from the room) with a broad brush properly, spennelleremo abundantly on all parties not painted furniture (raw wood).
Back, and internal funds of drawers and furniture should be treated, trying to apply more product possible.
When the type of mobile allows, will be useful on the next bend or turn it over to spennellare the liquid antitarlo perpendicular to the surface to be treated, so that the force of gravity helps the product to penetrate deep into the wooden structure.
Thanks to its characteristics, in fact, the antitarlo liquid penetrates deeply into the wood allowing to reach the insects nested in more depth.
After the first hand of the antitarlo was absorbed by the wood and then the surface is dry again (takes a few days) will be applying a second hand, always with the process described above.

At this point move to close the holes of tarli, which will be run with sticks of wax or with the juice (or ready to prepare for Bologna with plaster and glue strong) if the holes are many and the finish is planned to shellac.

This type of action is possible in any environment even at home, especially if you use a product antitarlo nontoxic and odorless as the SINOTAR:

The antitarlo SINOTAR is a ready-made solution, completely colorless and odorless, to be applied by brush or spray on manufactured goods in working or in work.
The antitarlo SINOTAR bottle is packaged in 1 lt. and 5 lt. and also in convenient spray nozzle fitted with suitable for the location of the product in the holes of tarli. (Confirm 400 ml).

Dell'antitarlo SINOTAR characteristics:
The solvent of 'antitarlo SINOTAR can convey the active ingredient (Permethrin) in an optimal way for effective penetration into the wood (in 24 hours Sinotar, for capillarity, can penetrate the wood for more than 50 cm.) And is not toxic for humans.
SINOTAR pass the test of effectiveness against larvae dell'Hylotrupes Bajulus according to the European Protocol UNI EN 46. Presidio Surgical Medical Registration No. 18,765.

- Do not dangerous to humans
- Do not spread toxic gases and odors
- Prevents new infestations
- Odorless, colorless and does not stain

 
I Tarla
Tarla Wood is the definition by which we tend to group together many different families and species of insects with a characteristic in common: to reach maturity their larvae must have wood. These insects are defined xilofagi.
In the diet of most of these insects cellulose is predominant, followed by lignin and hemicellulose, have less importance: proteins, sugars and starches.
Insects draw nourishment from these substances with different methods: In some cases, the digestion of cellulose is only possible thanks to the presence of microorganisms into the symbiont larvae. Other species are established in the wood when there is a fungus attack, usually Basidiomiceti that disrupt your structure of wood and cellulose and lignin attacks.
Some insects attack xilofagi only hard part of the plant (duramen), other than tender (sap), some only seasoned wood and other wood recently.
The larvae belonging to the families Lictidi, Anobidi and Bostrichidi, feeding reduce the timber to a mass of fine powder, which is known to fall to earth in abundance by the shimmy holes after the adulti.Al against them cause very slight damage, because their primary function is only one reproduction. Other species have larvae that produce rosura stock that tends to pack and not fall to the ground when the shimmy. In some cases, finally, adults cause damage.

The following table lists the families (and species) of tarli more frequent:

1) ANOBIDI Anobium punctatum, Xestobium rufovillosum, Ernobius mollis, Nicobium castaneum, Ptilinus pecticornis.
2) LICTIDI Lyctus brunneus, Lyctus linearis
3) BOSTRICHIDI Dinoderus minutus, Scobicia declivis
4) CERAMBICIDI Hylotrupes bajulus, Callidium violaceum
5) BUPRESTIDI Capnodis tenebrionis
6) SCOLITIDI Xyleborus dispar
7) CURCULLIONIDI Rhyncolus culinaris, Pentarthrum hutton

In Italy the more damage is generally caused by: Anobium punctatum, Xestobium rufovillosum, Lyctus brunneus and Hylotrupes bajulus.
anobium_punctatum
The Anobium punctatum

     * Move
     * Close

ANOBIUM PUNCTATUM XESTOBIUM RUFOVILLOSUM

B
I
Or
L
Or
G
I
A STAGE OF are deposed UOVO from 20 to 60 eggs; this stage lasts 15-59 days as temperatures are laid between 40 and 60 eggs, this stage lasts 15-50 days according to the temperature
STAGE larvae about 3 years 1-10 years
STAGE OF PUPA 10-14 days. in accordance with the temperature around 28 days
LIFE FROM ADULT 20-30 days 20-25 days
Flickers from June to August from April to May

H
To
B
I
T
To
T wood timbers ATTACK hard and soft wood hard
MATERIALS wooden structures, flooring, skirting, furniture, handmade wicker and offset the recent production of wooden structures, fixtures and equipment
GALLERIES larvae to meander, with no deterioration due to mold a meander with the presence of deterioration due to mold
ROSURA little balls with a granular form of lemon little rough with balls crushed
OF HOLES
Flickers numerous, circular in shape with a diameter of 1-1.5 mm numerous, circular in shape with a diameter of 2.5-4 mm
can better adapt to different types of timber, because the larva into the home to a large number of digestive enzymes, this quality allows him to attack artefacts of all kinds, and not dated. The only limitation to its expansion is the kind of spawning: the female in fact, given the particular configuration dell'ovodepositore, lay eggs inside the wood in minute cracks and therefore the timber treated with resins or varnish glazing not is attacked. Not infrequently occurring cases coupling of adults before they shimmy.

xestobiumrufovillosumkaef
The Xestobium rufovillosum

     * Move
     * Close

ANOBIUM PUNCTATUM XESTOBIUM RUFOVILLOSUM

B
I
Or
L
Or
G
I
A STAGE OF are deposed UOVO from 20 to 60 eggs; this stage lasts 15-59 days as temperatures are laid between 40 and 60 eggs, this stage lasts 15-50 days according to the temperature
STAGE larvae about 3 years 1-10 years
STAGE OF PUPA 10-14 days. in accordance with the temperature around 28 days
LIFE FROM ADULT 20-30 days 20-25 days
Flickers from June to August from April to May

H
To
B
I
T
To
T wood timbers ATTACK hard and soft wood hard
MATERIALS wooden structures, flooring, skirting, furniture, handmade wicker and offset the recent production of wooden structures, fixtures and equipment
GALLERIES larvae to meander, with no deterioration due to mold a meander with the presence of deterioration due to mold
ROSURA little balls with a granular form of lemon little rough with balls crushed
OF HOLES
Flickers numerous, circular in shape with a diameter of 1-1.5 mm numerous, circular in shape with a diameter of 2.5-4 mm
is commonly called the death watch for the characteristic noise caused by adults within the infested wood. This ticking, easily audible in the silence, is a reminder for mating product beating his head against the walls of tunnels.


cac6to66
The Lyctus brunneus

     * Move
     * Close

LYCTUS brunneus HYLOTRUPES BAJULUS

B
I
Or
L
Or
G
I
A STAGE OF are deposed UOVO from 50 to 60 eggs; this stage lasts 8 days with temperatures between 20 and 23 ° C are laid about 100 eggs, this stage lasts for 6-48 days according to the temperature
STAGE larvae 6-12 months 3-11 years
STAGE OF PUPA 3 weeks
LIFE FROM ADULT 3-6 weeks 2-3 weeks
Flickers April-May / July-August from July to August

H
To
B
I
T
To
T wood timbers ATTACK hard and soft tropical timber tender
MATERIALS furniture, back and sides of chairs and sofas, floors, skirting, handmade wooden semi-wooden structures, beams, trusses. The structure of the wood expands slightly and irregularly to the pressure inside rosura
GALLERIES larvae to meander, with straight stretches, and no deterioration due to mold rectilinear and curvilinear, and no deterioration due to mold
ROSURA abundant, very fine, floury balls without very abundant, with fine dust balls
OF HOLES
Flickers numerous, circular in shape with a diameter of 1.5 millimeters shortly numerous and full of rosura, elliptical in shape with a diameter of 4-9 mm long
like all Lictidi easily recognized for rosura completely floury and without the presence of balls. In addition, to recognize infestation under way, we can use the color of holes shimmy: clear holes for new, dark old.


cerambicidi
The Hilotrupes bajulus

     * Move
     * Close

LYCTUS brunneus HYLOTRUPES BAJULUS

B
I
Or
L
Or
G
I
A STAGE OF are deposed UOVO from 50 to 60 eggs; this stage lasts 8 days with temperatures between 20 and 23 ° C are laid about 100 eggs, this stage lasts for 6-48 days according to the temperature
STAGE larvae 6-12 months 3-11 years
STAGE OF PUPA 3 weeks
LIFE FROM ADULT 3-6 weeks 2-3 weeks
Flickers April-May / July-August from July to August

H
To
B
I
T
To
T wood timbers ATTACK hard and soft tropical timber tender
MATERIALS furniture, back and sides of chairs and sofas, floors, skirting, handmade wooden semi-wooden structures, beams, trusses. The structure of the wood expands slightly and irregularly to the pressure inside rosura
GALLERIES larvae to meander, with straight stretches, and no deterioration due to mold rectilinear and curvilinear, and no deterioration due to mold
ROSURA abundant, very fine, floury balls without very abundant, with fine dust balls
OF HOLES
Flickers numerous, circular in shape with a diameter of 1.5 millimeters shortly numerous and full of rosura, elliptical in shape with a diameter of 4-9 mm long
Capricorn commonly called the beams, preferably the attacks of conifer wood roofs. The infestation of this kind are very dangerous, because the first damage becomes apparent only after 2-3 years.